1. Choose Your Vinyl Art

Choose a favorite quote and/or graphics, or customize your own! Preview how they'll look with our online Design Center. Play with a variety fonts, sizes and colors. Once you're happy with your art, place your order and we'll begin creating your custom lettering.

2. Apply Your Vinyl Art

Your vinyl art will arrive on an very thin adhesive backed sheet of vinyl, pre-spaced. You can apply the art "as-is", or get creative and cut between the words or graphics to best fit your space.

Step 1: Draw Your Guide Line
Lay your vinyl art out on a hard, flat surface and rub the paper side of the art to ensure adhesion to the transfer tape layer. Make sure your surface is clean, dry and dust-free. Mark your wall (or object) with a pencil to ensure correct placement.

Step 2: Tape Your Art To The Surface
Place the vinyl art on your desired surface. Once you are happy with the placement, adhere the top edge of the lettering to the wall with tape creating a hinge.

Step 3: Flip and Peel
Lift the lettering up on the hinge and slowly peel the thicker backing paper underneath away. Your vinyl art should remain on the clear transfer tape. If not, gently press on the backing paper and try again.

Step 3: Rub Your Art To The Surface
Lower the quote back down onto the wall and rub with your hand or burnisher, making sure any air bubbles are pushed out.

Step 4: The Final Peel
Slowly peel off the top sheet of transfer tape by grabbing the top left corner and begin to peel downward. Your vinyl lettering should adhere to the wall with no problem. If any letters lift, place the transfer tape back over them and rub some more then continue peeling the transfer tape away.

Step 5: Enjoy!
Your vinyl art is now ready to enjoy!

3. Vinyl Art Removal

To remove vinyl art, warm up the vinyl using a hair dryer on a low setting. Peel back the warmed vinyl being careful not to rip or peel too quickly. Vinyl art cannot be used again. Lettering should not remove paint of wall.